CaptureView FAQ
Download CaptureView 8x22 Manual (PDF)
CaptureView 8x22 Specifications
   Tech Support
   Download Windows XP Driver
CaptureView II
  1. What can I view with my CaptureView Binoculars?
    A: Use your CaptureView Binoculars for Sporting Events, Bird-watching, Public Events, viewing wildlife. Anything you would use a standard pair of binoculars for, the CaptureView will see and give you the added advantage of capturing the image.

  2. Can I take pictures in cold weather?
    A: Your CaptureView Binocular is rated to be used from 41F - 104F (5 to 40C), 20%-85% relative humidity, non-condensing. Using your camera in below freezing tempertures may not allow the camera to function normally, and may cause the batteries to lose their charge more quickly.

  3. Can I use other programs to manipulate my images? Can I use them to download images from my Camera?
    A: You can use your other photo imaging programs to manipulate your images. The CaptureView binoculars will have no trouble downloading images to other software.

  4. How do I focus the Camera?
    A: The camera will be in focus no matter whether the image is in or out of focus for your eyes. The range for the CaptureView binoculars is from 49 feet to Infinity for photography. The Binoculars will focus on objects 16.4 feet away, but for effective use of the camera, take pictures of objects from 49 feet to Infinity.

  5. How many images will it hold?
    A: The CaptureView 8x22 Digital Camera Binocular will hold up to 40 high resolution images on the VHI resolution mode (640x480). The CaptureView will hold 100 images on the LO resolution mode (320x240).


  1. I have Windows XP. Do I need a special driver?
    A: Check the part number (p/n) just above the UPC symbol on the back of the box. If the part number is CVB1001 the go : and download the CaptureView Certified Windows XP Driver below. These drivers will automatically install and you will be able to easily connect to the camera. If your camera has a different part number do not install the drivers from the website, the CD already has the most current drivers.

    Tip: If you are using Windows XP with a Pentium IV processor, Windows may ask you to install the driver more than once. If this is the case, follow the prompts in the "Install Driver Window", and continue to install the Driver as many times as Windows prompts you to. Normally this will only be 3 times. When Windows stops asking you to "Install New Drivers", the Scopecam driver will have been successfully installed.

  2. The Ulead Photo Express program doesn't see my camera. What do I do?
    A: Make sure the camera is plugged in to the USB port of your computer. Verify that "Scopecam" appears as the data source within the Ulead Photo Express program.

    If "Scopecam" does not show as the "Data Source" you will need to select "Change Device Type" and then select "Digital Camera".

    If you see a message prompting you to "please choose data source", Select the "Scanner" and then scopecam will appear in the data source. Then select "Change Device Type" and choose "Digital Camera".

    The Ulead program should now see the camera.

    If this does not solve the problem, you may need to uninstall the Driver and then Re-install it.

  3. The Ulead Photo Express program doesn't see my CaptureView Binoculars, and the CaptureView is stuck on the "PC" setting. What should I do?
    A: If your CaptureView Binoculars become stuck on the "PC" setting, The Ulead Photo Express will not be able to "See" the camera. Take out the two AAA batteries and leave them out for approximately 5 minutes. This will delete everything from the memory of the CaptureView Binoculars and they will function normally after the batteries are replaced. Unfortunately you will lose all the pictures that were stored in the camera, but the camera will function again normally, and the Ulead program will be able to connect with it.

  4. I have more than one USB port on my computer. Does it matter which one I use to connect the camera?
    A: You can use any USB port. But it is important to note that you will have to install the "Scopecam" Driver each time you use a new port other than the original port you connected the camera to the first time.

  5. My computer locked up while installing the Software. What do I do?
    A: Follow any prompts on your computer. Reboot your computer if necessary.

    For Windows XP:
    You will need to download the latest updates for Windows XP from Microsoft.
    On the Internet, log onto www.microsoft.com:

    1. On the left side of the screen you will find "Windows Update" listed.
    2. Go to the windows update page and left click on "Scan & Review for updates".
    3. When the Scan is complete it is necessary to install all of the "Critical Updates" and "Driver Updates" for Windows XP.
    4. When this is complete the Drivers will install without any difficulty.

    For Windows 98SE, ME, and 2000:
    Install the drivers manually.

    1. Return to the desktop.
    2. Open Windows Explorer. Click [Start] button from bottom left of task bar.
    3. Select "Run ..."
    4. Type in "EXPLORER".
    5. Click on [OK] button to run.
    6. Click on "+" sign of "My Computer"
    7. Click on CD-ROM drive where it labels "PE3". Expand the drive to show contents. Click "+" sign of "+ PE3(E:)"
    8. Double left mouse click on the "Driver" folder to show the contents.
    9. Double left mouse click on "Setup.exe" (if shown) or "Setup" with the blue computer shaped icon to run setup.
    10. Follow the steps in the InstallShield Wizard to complete the installation of the driver.
    Tip: If you have any problems using the Ulead Photo Express software. Please refer to the Ulead Photo Express Help file located within the Help Menu.

| home | about meade | product information | dealer locator | Meade 4M |
| customer support | investor relations | dealer support |
| employment opportunities | site map |

® The name Meade, the Meade logo, and ETX are trademarks registered with the United States Patent Office,
and in principal countries throughout the world.
Copyright © 2005 Meade Instruments Corporation, All Rights Reserved.
This material may not be reproduced in any form without permission.